Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Lasse Moell ✭✭

  • Re: S meter

    Lasse MoellLasse Moell
    Of course the difference of going from 2.8 to 1.8 kHz is small, it's less than 2 dB. Remember Flex has chosen 6 dB for each step, i.e. you need to go fron 2.8 down to 0.7 kHz to have one S-unit …

  • Re: Noise

    Lasse MoellLasse Moell
    If you have high noise with no antenna attached, it likely to be related to your radio. Now, the S-meter value is direct related to the filter BW, larger BW "more" noise. But you will also …

  • Re: S Meter Reading after Service

    Lasse MoellLasse Moell
    Sounds like something is not correct with your radio. Never mind S-units or band noise, but if you terminate your antenna input with a 50 ohm load (this is better than shorting the input giving the i…

  • Re: European 220V Greece plug

    Lasse MoellLasse Moell
    The plug looks like all my three-wire plugs in my shack. https://www.worldstandards.eu/electricity/plugs-and-sockets/As most of EU does not adhere to the extra pin in the socket, we can rotate the pl…

  • Re: Profile Auto Save Discussion

    Lasse MoellLasse Moell
    Some want to have the profle to autosave other want it to stay as it was from the beginning. Why not have a "file lock"-feature, if this is set, that specific profile cannot be overwritten,…
Avatar